This iPad mount is one of the best on the market because of its design and function. It fits into the Mavic 2 controller perfectly and can securely grip an 11-inch iPad Pro. The mount can be adjusted to allow a view of the controller’s screen and does not get in the way of the controller’s antennae. So, it does not put the iPad in a position where it blocks the radio signal to the drone. The balance is excellent, even with the 11-inch iPad because the mount keeps the iPad close to the operator. A hood can be used with this mount and there is room for parabolic reflectors on the antennae. Another positive point is that the mount breaks down into two pieces and folds up compactly. The whole unit fits into the spaces in my PGYTech carry case. When I’m ready to fly, the mount goes together with a single captive machine screw that has a grip on the end for tightening.
I was reluctant to buy a mount that placed my iPad behind the controller screen because I didn't think I could fly the drone without seeing its screen. But DJI Go 4 software puts all of that information and more on the screen of the iPad. And, with this mount, I can still look over the top and see the screen and where the controller's function buttons are.
This mount was specifically engineered to fit the Mavic 2 controller which has a recessed groove that is not straight. This base of the mount is sculptured to fit in that groove, leaving room to connect a USB cable and hear the controller’s speakers. The Mavic 2 controller arms that are designed to hold a cell phone will grip the base mount firmly on both sides. The base mount supports a folding arm that screws onto the iPad holder without the need for a tool. The iPad holder is all metal with rubber pads to grip the iPad. The top and bottom jaws of the iPad holder both open wide enough to fit in an 11-inch iPad Pro with a few millimeters to spare. Not enough space to take an iPad with protective cover, but enough to hold the bare 11-inch iPad. This mount also comes with a Crystal Sky monitor mount, spare plastic caps and tools to tighten the joints if they ever become loose. After flying with it I am totally satisfied with the way it works.
Similar item to consider
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
Product Description
Full Aluminum-Alloy Design
A Must Have Accessories
Compatible for DJI Mavic Air / Mavic Pro / Mavic 2/ DJI Spark / Mavic Air 2 / Mavic Mini 2/Mavic Pro 2/Mavic Air 2s Remote Controller
Material: Aluminum
Weight:225g
Color:Red
Clever Design
|
|
|
|
|---|---|---|
Foldable DesignFoldable design for convenient storage Stable support and no shaking |
Angle AdjustableAdjustable view angle Adjust the angle according to personal need |
1/4 ScrewCompatible with 1/4 smartphone / tablet holder on the market |
Special Design for Your Data Line
Reserved hole for data line for your convenient using
Easy to install and say not to plastic loose shaking tablet mount
Package List
1 x Aluminum-Alloy Bracket
1 x Aluminum-Alloy Holder
1 x Tool kits
1 x Crystal Sky Monitor Holder
1 x Strap
1 x Storage Bag
2 x Screws
Compare with similar items
This Item  Tablet Holder Foldable Tablet Ipad Mount Holder Full Aluminum-Alloy Support Crystal Sky for DJI Mavic Air /Mavic 2/Zoom Spark Mavic Air 2s Mini 2 Mini 3 Controller Mount Accessories |  |  |  |  |  | |
| Price | Currently unavailable. | $19.99 | $8.99 | $14.99 | $23.99 | $13.88 |
| Delivery | — | Get it as soon as Saturday, May 11 | Get it as soon as Saturday, May 11 | Get it as soon as Saturday, May 11 | Get it as soon as Saturday, May 11 | Get it as soon as Monday, May 13 |
| Customer Ratings | ||||||
| Remote Control | ||||||
| Sturdiness | ||||||
| Quality of material | ||||||
| Value for money | ||||||
| Portability | ||||||
| Sold By | — | USBOR | HeiyRC Direct | USBOR | Tercel Inc | Tineer |
| compatible phones | 4.5inch-7.1inch wide | DJI Mini 2, DJI Mini 2 SE, DJI Air 3, DJI Air 2S, DJI Mavic 3, DJI Mini 3, DJI Mavic Air 2, DJI RC-N1, DJI RC-N2 | iPad Mini, iPad Air, Galaxy Tab S6 S7 | DJI Mini 4 Pro, DJI Air 3, DJI Mini 3, DJI Mini 3 Pro, DJI Mini 2, DJI Mini 2 SE, DJI Air 2S, DJI Mavic Air 2, DJI Mavic 3, DJI Mavic 3 Cine, DJI Mavic 3 Classic, DJI RC-N1, DJI RC-N2 | Samsung Galaxy S7 | Mavic |
| mounting type | Foldable | Freestanding,Phone Mount | Clip On | — | Tabletop Mount | — |
| material | Aluminum | — | Acrylonitrile Butadiene Styrene | Plastic | Aluminum | Acrylonitrile Butadiene Styrene |
| special feature | Full Aluminum-alloy material, very solid and stable for your tablet or phone | Upgraded, Portable, Lightweight, Easy Length Adjustment, User-friendly | Adjustable | Upgraded, Portable, Foldable, Collapsible, Lightweight, User-friendly | Foldable | Lightweight,Travel,Foldable |
| unit count | 1 | 1 | 1 | 1 | 1 | 1 |
| weight | 300 grams | 0.11 kilograms | 0.04 pounds | 0.11 pounds | 274.85 grams | — |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
2:39
Click to play video
Full Aluminum-Alloy Foldable Tablet Stand Holder
Thriverline
Reviews with images
Excellence in Design and Manufacture
This iPad mount is one of the best on the market because of its design and function. It fits into the Mavic 2 controller perfectly and can securely grip an 11-inch iPad Pro. The mount can be adjusted to allow a view of the controller’s screen and does not get in the way of the controller’s antennae. So, it does not put the iPad in a position where it blocks the radio signal to the drone. The balance is excellent, even with the 11-inch iPad because the mount keeps the iPad close to the operator. A hood can be used with this mount and there is room for parabolic reflectors on the antennae. Another positive point is that the mount breaks down into two pieces and folds up compactly. The whole unit fits into the spaces in my PGYTech carry case. When I’m ready to fly, the mount goes together with a single captive machine screw that has a grip on the end for tightening.I was reluctant to buy a mount that placed my iPad behind the controller screen because I didn't think I could fly the drone without seeing its screen. But DJI Go 4 software puts all of that information and more on the screen of the iPad. And, with this mount, I can still look over the top and see the screen and where the controller's function buttons are.This mount was specifically engineered to fit the Mavic 2 controller which has a recessed groove that is not straight. This base of the mount is sculptured to fit in that groove, leaving room to connect a USB cable and hear the controller’s speakers. The Mavic 2 controller arms that are designed to hold a cell phone will grip the base mount firmly on both sides. The base mount supports a folding arm that screws onto the iPad holder without the need for a tool. The iPad holder is all metal with rubber pads to grip the iPad. The top and bottom jaws of the iPad holder both open wide enough to fit in an 11-inch iPad Pro with a few millimeters to spare. Not enough space to take an iPad with protective cover, but enough to hold the bare 11-inch iPad. This mount also comes with a Crystal Sky monitor mount, spare plastic caps and tools to tighten the joints if they ever become loose. After flying with it I am totally satisfied with the way it works.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on February 12, 2020
This iPad mount is one of the best on the market because of its design and function. It fits into the Mavic 2 controller perfectly and can securely grip an 11-inch iPad Pro. The mount can be adjusted to allow a view of the controller’s screen and does not get in the way of the controller’s antennae. So, it does not put the iPad in a position where it blocks the radio signal to the drone. The balance is excellent, even with the 11-inch iPad because the mount keeps the iPad close to the operator. A hood can be used with this mount and there is room for parabolic reflectors on the antennae. Another positive point is that the mount breaks down into two pieces and folds up compactly. The whole unit fits into the spaces in my PGYTech carry case. When I’m ready to fly, the mount goes together with a single captive machine screw that has a grip on the end for tightening.
I was reluctant to buy a mount that placed my iPad behind the controller screen because I didn't think I could fly the drone without seeing its screen. But DJI Go 4 software puts all of that information and more on the screen of the iPad. And, with this mount, I can still look over the top and see the screen and where the controller's function buttons are.
This mount was specifically engineered to fit the Mavic 2 controller which has a recessed groove that is not straight. This base of the mount is sculptured to fit in that groove, leaving room to connect a USB cable and hear the controller’s speakers. The Mavic 2 controller arms that are designed to hold a cell phone will grip the base mount firmly on both sides. The base mount supports a folding arm that screws onto the iPad holder without the need for a tool. The iPad holder is all metal with rubber pads to grip the iPad. The top and bottom jaws of the iPad holder both open wide enough to fit in an 11-inch iPad Pro with a few millimeters to spare. Not enough space to take an iPad with protective cover, but enough to hold the bare 11-inch iPad. This mount also comes with a Crystal Sky monitor mount, spare plastic caps and tools to tighten the joints if they ever become loose. After flying with it I am totally satisfied with the way it works.
I was reluctant to buy a mount that placed my iPad behind the controller screen because I didn't think I could fly the drone without seeing its screen. But DJI Go 4 software puts all of that information and more on the screen of the iPad. And, with this mount, I can still look over the top and see the screen and where the controller's function buttons are.
This mount was specifically engineered to fit the Mavic 2 controller which has a recessed groove that is not straight. This base of the mount is sculptured to fit in that groove, leaving room to connect a USB cable and hear the controller’s speakers. The Mavic 2 controller arms that are designed to hold a cell phone will grip the base mount firmly on both sides. The base mount supports a folding arm that screws onto the iPad holder without the need for a tool. The iPad holder is all metal with rubber pads to grip the iPad. The top and bottom jaws of the iPad holder both open wide enough to fit in an 11-inch iPad Pro with a few millimeters to spare. Not enough space to take an iPad with protective cover, but enough to hold the bare 11-inch iPad. This mount also comes with a Crystal Sky monitor mount, spare plastic caps and tools to tighten the joints if they ever become loose. After flying with it I am totally satisfied with the way it works.
Images in this review
Reviewed in the United States on November 24, 2023
Reviewed in the United States on December 23, 2021
So far I'm impressed by their attention to detail. It's nicely designed and it fits the Mavic 2 controller quite well. They included extras in the kit. - Tools for adjusting the tension on the joints, - Spare joint caps, - Separate CrystalSky mount, - Lanyard, - Soft carrying pouch.
I tested it with an 11" Samsung Galaxy Tab S7. As tablets go, it's fairly heavy. This mount held its position fairly well. I would advise against jogging around with it, or making sudden harsh movements. The weight of a larger tablet can still cause this mount to move if you're spazzing out. I think it will feel pretty solid with a smaller tablet. The folding design makes it easy to carry around between flights.
Clamp depth: My only criticism is the depth of the clamp. I don't think it would accommodate a tablet with a case. You be the judge.
Craftsmanship and material quality seem really good as well. So far, so good. I'll provide an update if anything changes.
It's Stable, but Larger or Heavy Tablets Might move a bit
Reviewed in the United States on December 23, 2021
INITIAL ASSESSMENT, Dec 2021Reviewed in the United States on December 23, 2021
So far I'm impressed by their attention to detail. It's nicely designed and it fits the Mavic 2 controller quite well. They included extras in the kit. - Tools for adjusting the tension on the joints, - Spare joint caps, - Separate CrystalSky mount, - Lanyard, - Soft carrying pouch.
I tested it with an 11" Samsung Galaxy Tab S7. As tablets go, it's fairly heavy. This mount held its position fairly well. I would advise against jogging around with it, or making sudden harsh movements. The weight of a larger tablet can still cause this mount to move if you're spazzing out. I think it will feel pretty solid with a smaller tablet. The folding design makes it easy to carry around between flights.
Clamp depth: My only criticism is the depth of the clamp. I don't think it would accommodate a tablet with a case. You be the judge.
Craftsmanship and material quality seem really good as well. So far, so good. I'll provide an update if anything changes.
Images in this review
Reviewed in the United States on October 30, 2019
